Three Jaws Front Mounted High Speed Pneumatic Chuck For Pipe Thread
Machine Tool
1. Description
Our company is a professional manufacture of producing chucks for
lathe, CNC lathe and laser cutting machine. Pneumatic chucks and
power chucks are our leading products. Here lists the featured of
pneumatic chucks.
The obvious characteristics of this chuck are light weight, big
hole diameter, high stroke and high speed when rotating. Because
the connecting between the chuck and main shaft complies with the
national standard(short cylinder connecting mode), there’s no need
to change the structure of the lathe and just only prepare the
matching flange which can connect to the chuck and machine tool
when installing.This kind of chuck is front mounted pneumatic chuck
and is widely used in lathe, pipe thread machine tool and welding
equipment.
It is easy to install the chuck.The chuck body is the cylinder,
with piston and inverted valve inside to achieve super-long time
pressure-keeping function (more than 24 hours). The clamping and
loosing movement is achieved by rotary air inlet at the side. The
machine will not work before cutting off the gas supply.
2. Performance Parameters
Model number | BK200TQ |
Claw stroke/diameter | 4.7mm |
Max. clamping force | 41.7KN |
Allowable pressure | 0.4-0.9Mpa |
Limit speed | 2100r/m |
Clamping range | 5-210mm |
Net weight | 25.5KG |
3. Dimensions
| Specifications | D | D1 | D2 | D3 | d | H | H1 | H2 | z-d |
| BK200TQ | 214 | 258 | 180 | 165 | 52 | 145 | 105 | 72 | 3-M10 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available
e.1 Solid or hollow
e.2 Comb-type or mortise-groove type claws |
5. Production Line
