New Design Central Solid Four-claw Feeding Chuck for Chuck Lathe
1. Description
This product is specially designed for laser pipe cutter. The
product itself can be used as an independent spindle with a chuck
in the middle which can firmly clamp the work-piece and rotate at
the same time.
Rotating air inlet can be realized through tail-mounted rotator so
that the rapid clamping and loosening action can be achieved. The
working air source adopts the principle of continuous air supply.
After the product base is fixed, connect the matched motor with the
gear, and connect the compressed air source(0.4-0.9Mpa) to realize
clamping and driving the work-piece to rotate. It is mainly used
for work-piece clamping, rotating and front and back feeding.
Because of the long length of the parts processed by the cutter,
the tail chuck and the matched main chuck are usually installed in
pairs on the equipment.
This product is a four-claw automatic synchronous centering
structure with solid center. It is recommend to be used in
tube-sheet integrated machine and it can cut the square and
circular tube-sheet.
2. Performance Parameters
| W160A-25 |
| 25mm |
| 4.8KN |
| 0.4-0.9MPa |
| 500r/min |
| 15-160mm |
| 150mm |
| 0.1kg.m2 |
| 21kg |
| 44kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | L | M | N | O | R | S | T |
| W160A-25 | 280 | 150 | 290 | 295 | 120 | 85 | 245 | 94 | 0 | 130 | 152 | 11 | 16 | 5 | 12 | 6-M8 | 13 | 265 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
