New Design Stainless Steel Chuck CNC Router Rotary Axis Laser Chuck
with Four Jaw
1. Description
Our chuck is mainly made for laser cutting machine and chuck itself
can be applied as an independent rotating spindle. It can tightly
clamp the work-piece as well as rotating. The quick clamping and
loosening actions can be achieved through the side rotating.
The chuck works along the full stroke, there is no need to adjust
the four-jaw position, a full range of applicable pipe parts can be
clamped, and the production efficiency is improved. The chuck is in
a closed structure and has good stability and wear resistance.
With cross roller bearing, it has longer service life, higher
accuracy and repeated positioning accuracy than a traditional laser
chuck.Compared with the similar products in the market, it has
larger clamping force. In addition, in the case of a low air
source, a smaller clamping force can be obtained to satisfy the
processing of thin-walled pipes.
The chuck is commonly used in special laser cutters and other pipe
processing machine systems.
2. Performance Parameters
Model number | G500C-225 |
| Claw stroke | 200mm |
| Maximum clamping force | 1.6-2.77KN |
| Alloable pressure | 0.1-0.9MPa |
| Limit speed | 130r/min |
| Clamping range | 0-225mm |
| Central height | 315mm |
| Rotational inertia | 6.1kg.㎡ |
| Rotating part weight | 140kg |
| Whole unit weight | 240kg |
Note: above numbers are standard parameters. We can also design
products according to clients' special requirements.
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | K | O | R | S |
| G500C-170 | 670 | 315 | 694 | 672 | 100 | 60 | 640 | 273 | 225 | 235 | 250 | 400 | 10 | 8-M8 | 18X21 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
