Full Stroke Special Purpose Laser Pipe Cutting Chuck Pneumatic
Chuck with Four Jaw for CNC Drilling Machine
1. Description
This product is specially designed for laser cutting units, the
product itself can be used as an independent rotating spindle, with
a chuck in the middle that can clamp a work-piece tightly and
rotate at the same time.
The chuck works along the full stroke, there is no need to adjust
the four-jaw position, a full range of applicable pipe parts can be
clamped, and the production efficiency is improved.
The chuck adopts fully enclosed structure, the stability and the
wear resistance are better, the service life is longer, the
clamping precision is higher than a traditional laser chuck, the
clamping force is bigger than the similar products in the market,
and the aerodynamic pressure is lower, smaller clamping force can
be obtained, so that thin-walled pipe parts can be processed.
2. Performance Parameters
Model number | G400C-170 |
| Claw stroke | 165mm |
| Maximum clamping force | 1.36-2.45KN |
| Alloable pressure | 0.1-0.9MPa |
| Limit speed | 150r/min |
| Clamping range | 0-170mm |
| Central height | 315mm |
| Rotational inertia | 3.95kg.㎡ |
| Rotating part weight | 128.5kg |
| Whole unit weight | 210kg |
Note: above numbers are standard parameters. We can also design
products according to clients' special requirements.
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | K | O | R | S |
| G400C-170 | 600 | 280 | 590 | 602 | 100 | 60 | 570 | 273 | 170 | 235 | 250 | 400 | 10 | 8-M8 | 18X21 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
