Hollow Structure Manual Laser Chuck Dual-power Chuck of Laser Pipe
Cutter
1. Descripition
Our chucks are mainly made for laser pipe cutting machine. Our
chuck itself can be applied as an independent spindle which also is
a manual chuck in the middle. It only needs to connect the matched
motor with the gear after fixing the base to make it rotate.
Clamping the work-piece tightly and driving the work-piece to
rotate can be made by controlling two sets of jaws. Because the
length of work-piece is long, it usually used as main chuck which
is in the head position of laser cutting machine and installed on
the equipment with matched back chuck.
The chuck has four jaws and is in pairwise centering structure. It
can be applied to clamp the circular, square, rectangular,
elliptical and other work-pieces with central axis symmetry.
The center of the product is of hollow structure. It is recommended
to be installed on the tube sheet integrated machine.
2. Performance Parameters
| G400S-165 |
| 140mm |
| / |
| 0.4-0.9MPa |
| 500r/min |
| 0-160mm |
| 260mm |
| 1.85g.m2 |
| 82kg |
| 95kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | L | M | N | O | P | Q | R | S |
| G400S-165 | 460 | 260 | 480 | 515 | 120 | 80 | 420 | 100 | 165 | 220 | 240 | 30 | 60 | 4 | 5 | 20 | M10 | 8-M8 | 14 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5.Production Line
6. Our Service
1. We are the direct factory with good price and fast lead time.
2. Professional design team work with you.
3. Professional QC team to guarantee the high quality.
4. Providing OEM & ODM service.
