High Quality Central Solid 4 Jaws Chuck with Dual Power for Laser
Pipe Cutter
1. Description
This product is specially designed for laser pipe cutter. The
product itself can be used as an independent spindle with a chuck
in the middle which can firmly clamp the work-piece and rotate at
the same time.
After the product base is fixed, connect the matched motor with the
gear, and connect the compressed air source(0.4-0.9Mpa) to realize
clamping and driving the work-piece to rotate. It is mainly used
for work-piece clamping, rotating and front and back feeding.
Becaus the length of the parts processed by the cutting machine is
longer, the back chuck and matched main chuck are commonly
installed in pairs on the equipment. This kind of feeding chuck is
a automatic two-two-center structure and it has four claws with
dual power. It can be applied to clamp the circular, square,
rectangualr, elliptical and other central axis symmetrical parts.
In addition, it is also in solid structure and kindly recommend it
to be used on heavy pipe cutting machine.
2. Performance Parameters
| W320S-50 |
| 50mm |
| 4.5KN |
| 0.4-0.9MPa |
| 500r/min |
| 20-320mm |
| 260mm |
| 1.68kg.m2 |
| 107kg |
| 185kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | L | M | N | O | P | Q | R | S | T |
| W320S-21 | 520 | 260 | 460 | 490 | 175 | 130 | 475 | 223 | 0 | 65 | 88 | 20 | 45 | 4 | 30 | 20 | M12 | 6-M10 | 18 | 375 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
