High Efficiency Double-acting Feeding Chuck with 4 Jaw for Laser
Pipe Cutting Machine
1. Description
This solid feeding chuck is specially designed for laser tube
cutting equipment. The quick clamping and loosening actions can be
made by air intake through the gyrator which is at the end of the
chuck. Rotary air intake is achieved through the gyrator equipped
at the end to achieve fast clamping and loosening actions. The air
source supplies air continuously during work.
This chuck has large clamping force, high efficiency and the
ability of clamping is very stable. It is convenient to adjust all
the parts of it. The stiffness of the chuck is higher than long
clamping claw and its accuracy can be maintained for a long time.
There is no phenomenon that the bending deformation of the clamping
claw affects the rotary precision.
The design length of the clamping claw is short, and the phenomenon
that slippery is caused and the clamping is unstable because of a
long clamping claw horn does not appear at the condition of the
maximum clamping force; the chuck has a simple structure, light
weight, small moment of inertia and low energy consumption.
2. Performance Parameters
| W300J |
| 86mm |
| 9.8KN |
| 0.3-1.0MPa |
| 500r/min |
| 10-314mm |
| 250mm |
| 2.2kg.m2 |
| 145kg |
| 175kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | I | J | L | M | N | O | P | Q | R | S | T |
| W300J | 440 | 250 | 300 | 475 | 250 | 200 | 380 | 962 | 190 | 220 | / | / | / | / | / | / | 12-M10 | 18 | 464 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
