Pneumatic Power Central Solid 4 Jaws Chuck with Dual Power for
Laser Pipe Cutter
1. Description
Our feeding chucks are also designed for laser pipe cutting machine
which are also suitable for our main chucks. The chuck is in a
solid structure and it is dual-power automatic two-two-center
structure. It can be used to clamp the circular, square,
rectangular, elliptical and other central axis symmetrical parts.
About the rapid clamping and loosening actions, they can be
achieved by gyrator which is at the end of the product rotating air
intake. And air source is continuously supplied when working. When
fixing the chuck base, it only needs to connect connect the matched
motor with the gear and compressed air source, the clamping and
driving work-piece to rotate can be achieved.
Due to the long length of the parts processed by the cutting
machine, the back chuck and matched main chuck are usually
installed in pairs on the equipment.
2. Performance Parameters
| W400S-56 |
| 56mm |
| 13.5KN |
| 0.4-0.9MPa |
| 5300r/min |
| 20-400mm |
| 300mm |
| 5.6kg.m2 |
| 190kg |
| 270kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | L | M | N | O | P | Q | R | S | T |
| W400S-56 | 525 | 300 | 578 | 589 | 180 | 135 | 475 | 223 | 0 | 100 | 130 | 20 | 45 | 4 | 30 | 30 | M12 | 8-M10 | 18 | 375 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
