Automatic Roatry Laser Chuck Main Chuck For Pipe Cutting Machine
1.Descripition
The product is specially designed for laser pipe cutter. The
product itself can be used as an independent spindle with a chuck
in the middle which can firmly clamp the work-piece and rotate at
the same time. With the built-in two independent cylinders, one-way
valve and check valve, it has long-term pressure-holding function(
more than 8 hours), rapid clamping and loosening action can be
achieved through the side rotation of air inlet, and disconnect the
air source to start the work.
Because of the long length of the parts processed by the cutter,
the main chuck used as the head position of laser cutting and the
tail chuck matched with it are usually installed in pairs on the
equipment. The product is stable in structure and can withstand
large radial force, axial force and overturning force. It has
smooth rotation, high accuracy and low noise.
The product is a four-claw dual-power automatic, in order to keep
the using environment clean and sanitary, the series of products
can install the dust extraction device on the back, and are
recommend for installation in the pipe cutter.
2.Performance Parameters
| G360B-110 |
| 50mm |
| 0.8KN |
| 0.4-0.9MPa |
| 400r/min |
| 5-110mm |
| 225mm |
| 2.19Kg.m2 |
| 107kg |
| 149kg |
3.Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S |
| G360B-110 | 420 | 225 | 405 | 427 | 230 | 186 | 365 | 211 | 110 | 122 | 140 | 360 | 30 | 60 | 8 | 6 | 22 | M12 | 12-M8 | 18 |
4.Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5.Production Line
