Laser Cutting Machine Of Laser Pneumatic Chuck With Square Hole
Descripition
When the laser pipe cutting machine cuts and processes pipe
fittings, it is necessary to clamp and fix the pipe fittings with a
chuck.
The full-stroke chuck generally has two sets of jaws that can be
opened and closed respectively.
However, when it is used to clamp thin pipes or fragile pipe
fittings, the stroke of the jaws is not easy to control.
The processed pipe fittings are flattened or broken and the
processed pipe fittings are scrapped.
In response to this problem, the DF series full-stroke square hole
chuck - G620DF-245 chuck is launched.
| Performance parameters |
Model | G620DF-245 |
| Diameter/Jaw stroke | 236MM |
| Max. clamping force | 210KG/0.6MPA |
| Allowable pressure | 0.2-0.9MPA |
| Limit speed | 150R/MIN |
| Clamping range | Φ6-Φ242MM |
| Central height | 315MM |
| Moment of inertia | 5.2KG/M2 |
| Weight of rotating part | 120KG |
| Whole weight | 250KG |
| Dimensions |
| Model | A | B | B1 | C | D | E | F | G | H | J | S |
| G620DF-245 | 420 | 315 | 624 | 662 | 220 | 60 | 380 | 403.5 | 245X245 | 444.5 | 18X22 |
Advantages
1. High transmission efficiency and synchronization accuracy
2. In the case of the same size of the chuck, the applicable size
range of the processed pipe is wider. It can be effectively used to
clamp thin pipes or fragile pipe fittings to prevent flattening.
Market demand
3. The installation position of the reducer can be adjusted
arbitrarily
4. Reduce the difficulty of processing and manufacturing, which is
conducive to mass production; better dust-proof effect and stronger
pollution resistance
