225MM Laser Pneumatic Rotary Chuck For Laser Tube Cutting Machine
1. Descripition
This product is specially designed for laser pipe cutting units,
the product itself can be used as an independent rotating spindle,
with a chuck in the middle that can clamp a workpiece tightly and
rotate at the same time, fast clamping and loosening actions can be
achieved through the side rotating air intake, and the air source
can be disconnected for work.
The product uses the cylinder direct output, the mechanical
efficiency is high, the energy loss is small, the output clamping
force is big, the clamping force is stable. Because the cylinder is
used to clamp the workpiece directly, the working stroke of the
cylinder is the working stroke of the chuck, and the clamping range
is wide. The cylinder direct output is adopted, the out put force
and the air pressure are linear proportion, and software control
can be easily achieved. The chuck has a simple structure, few
components, light weight, low failure rate, stable performance,
small moment of inertia and low energy consumption. The axial
dimension of the chuck is small, and the cost for realizing the
zero tailing is lower.
2. Performance Parameters
| G600J-225 |
| 220mm |
| 1.7KN |
| 0.25-0.9MPa |
| 200r/min |
| 0-220mm |
| 350mm |
| 6.5Kg.m2 |
| 129kg |
| 177kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | R | S |
| G600J-225 | 520 | 350 | 680 | 390 | 179 | 120 | 460 | 185 | 225 | 280 | 12-M8 | 18 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing
profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
e. Multiple configurations are available
e. 1 Solid or hollow
e. 2 Comb-type or mortise-groove type claws |
5. Production Line
